Automotive Wiring Harness J1939 9 Pin Deutsch To Obd2 Cable For
Truck
Description
The J1939 9 Pin Deutsch To Obd2 Cable series is an environmentally silicone rubber sealed, thermoplastic
cylindrical connector, which is designed to be a faster, easier,
trouble free assembly diagnostic connector in heavy-duty industry
like truck, bus, cross-country vehicle,crane and forklift etc. When
mated, the contacts are protected from water, dust, lubricating
oils, fuel, road salt, grease, mud and other contaminants
encountered.
Specification
EDG-HD10-9-1939P-P080
| Terminal type | Wire type | CONT. Retention | REF crimp tensile | Failue Model |
| 1060-16-0122 | UL 1007 18# | 20 LBS | >20 LBS | Wire damage |
| 1060-16-0122 | UL 1007 16# | 20 LBS | >25 LBS | Grommet broken |
EDG-HD16-9-1939S-P080
| Terminal type | Wire type | CONT. Retention | REF crimp tensile | Failue Model |
| 1060-16-0122 | UL 1007 18# | 20 LBS | >20 LBS | Wire damage |
| 1060-16-0122 | UL 1007 16# | 20 LBS | >25 LBS | Grommet broken
|
Operating at temperatures -40℃ to +125℃, no Cracking, Chipping or
leaking after 20 test cycles from -40℃~+125℃.
No unlocking or unmating and exhibits no mechanical or physical
damage after sinusoidal vibration levels of 20 G’s at 10 to 2000Hz
in each of the three mulually perpendicular planes for 2 hours.
Force testing report as below shows
IP68 rating, waterproof withstand immersion under 1.2 meter of
water for 24 hours.
Company Information
Edgar Auto Harnesses Ltd., with design offices and over 7260 m2
manufacturing plant, supplies better economical solution and
innovative harnesses for many industries like automotive, medical
apparatus, electronic information, mechanical automation,
alternative fuel and other industries. Edgar has specialized in
wire harness over 20 years, certified by IATF/TS16949, ISO9001, UL
E468011 and UL E468011, with well-trained employees who’ve been
trained for PMP, IPC620, and 5S etc., fully equipped cutting,
crimping, soldering, molding, packing and testing instrument
etc..Edgar is located in the geometry center of The China Great Bay
Area within 3km to Humen port and the products have been exported
to America, Europe, Isrea, Japan etc.
Our Services
Consultancy and design assistance
Tool making
Cable and harness manufacturing
FAQ
1. Q: What’s the payment term?
A: Normally, TT 50% before prototype sample preparing or part
design, 100% in advanced before delivery. If payment is over $5000
or the big order placed, the payment term could be discussed.
2. Q: How about the delivery?
A: Normally we arrange air express like DHL, UPS, or FedEx etc. for
samples, ocean shipping for heavy production. Besides, customers
specify also is acceptable.
3. Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after
quotation and order start to drawing then double confirm with
client
